We’re proud to announce that Colson Valves has successfully completed Shell requalification at our new manufacturing facility at Unit 5, Bessemer Park, Rotherham.
The requalification followed a Design Validation Test (DVT) carried out in accordance with Shell MESC SPE 77/300. Because the test was successful, all of Colson’s existing TAMAP certifications and approvals have now transferred from our previous site at Unit 3, Brindley Way, to our new home at Bessemer Park. The new certificate is valid until 5 November 2031.
Exceeding the fugitive emissions target
The fugitive emissions results were a particularly significant part of the qualification. Fugitive emissions are the small leaks of gas that can escape from a valve’s stem seals in service. Under testing they’re measured using helium and graded into tightness classes, with Class A the tightest. The target for this test was Class BH. The Colson valve outperformed it and achieved Class AH, the highest helium tightness class.
For operators, that level of sealing means lower emissions, safer plant and more confidence in meeting environmental requirements. For us, it’s an important technical achievement. It shows that our valve design, manufacturing processes and assembly capabilities have kept their performance through the move to the new facility.
The DVT was carried out on a Process-to-Instrument Ball Valve, tested across a temperature range of −50°C to +150°C. The resulting qualification covers sizes from ½” to 2″ and pressure classes from ASME Class 150 up to Class 2500.
Investing in UK manufacturing
The move to Bessemer Park was a significant investment in Colson’s UK manufacturing capability. When you relocate a manufacturing operation, you have to show that every control, process and standard behind your approvals works as well in the new building as it did in the old one. This requalification gives our customers independent confirmation that ours do. Our in-house manufacturing and assembly and testing now run from the new site, and the same traceability standards apply (see quality and traceability). If you want to know how re-qualification works when a site or specification changes, read our guide to the re-qualification process.
The full range of our TAMAP-qualified products is retained and approved at Bessemer Park. That puts us in a strong position for the next chapter of Colson Valves’ development and for continuing to support Shell projects and other oil and gas customers around the world.
If you’d like to find out more about our valve ranges, or talk to us about your next project, our team will be glad to help.